36 Cavity Plastic Injection Moulding

In the field of plastic mass production, "multi cavity molds" are the core solution to improve production efficiency and reduce unit costs. As a typical configuration for medium to high production demand, 36 cavity plastic injection molds can achieve large-scale output of "single injection production of 36 products" by integrating 36 identical cavities in a single mold. Its design and application need to accurately balance the three core difficulties of "cavity consistency, filling uniformity, and cooling efficiency", and widely adapt to injection molding scenarios such as consumer electronics small parts, daily necessities, and packaging with "small volume, large batch size, and moderate precision requirements". It is a key tool connecting product design and industrial mass production. During operation, the injection molding machine conveys the molten plastic to 36 cavities through the main stream and shunt channels. After pressure maintaining and cooling, 36 pieces of products are formed synchronously. 36 pieces of finished products can be taken out with a single mold opening, realizing the large-scale production of "the first mock examination with many pieces".

P&M 36 Cavity Plastic Injection Moulding Introduction

1. Preparation before production: mold installation and parameter debugging (key prerequisite)

Mold installation and parameter matching must be completed before production to avoid production defects in the later stage.

2. Injection molding: 36 cavity synchronous filling and curing (core process)

The injection molding machine executes the molding process according to the set parameters and needs to monitor the filling and cooling status in real time.

3. Demoulding and retrieval: 36 products are retrieved simultaneously (to avoid damage)

Demoulding and retrieval require ensuring that 36 products are free from deformation and scratches, usually relying on automated equipment.

4. Post processing and testing: Ensure that all 36 products are qualified (quality control)

Post processing and testing are key to screening non-conforming products and ensuring batch quality.

P&M 36 Cavity Plastic Injection Moulding(Specification)

P&M 36 Cavity Plastic Injection Moulding Feature And Application

The application scenarios of 36 cavity plastic injection molds strictly match the characteristics of "small volume, large batch size, and moderate precision requirements", mainly concentrated in the fields of consumer electronics, daily necessities, packaging, medical consumables, etc

1. In the field of consumer electronics: large-scale production of small-sized precision components

The demand for "small components" in consumer electronics, such as buttons, connectors, and headphone accessories, is large in quantity and requires high dimensional accuracy. A 36 cavity mold is an ideal choice.

2. In the field of daily necessities: low-cost mass production of high-frequency small components

Small accessories such as buttons, zipper heads, and toothbrush handles in daily necessities require large quantities and are cost sensitive. A 36 cavity mold can significantly reduce costs.

3. Packaging field: Efficient production of disposable packaging components

The demand for "disposable small packaging" in the packaging field, such as bottle caps, small medicine bottles, and cosmetic sample bottles, is extremely high in bulk, and 36 cavity molds are the core production tools.

4. Medical consumables field: standardized production of small medical accessories

Small consumables in the medical field, such as syringe accessories, infusion set connectors, and blood collection needle protective covers, require batch standardized production, and 36 cavity molds can ensure consistency.

5. Automotive parts field: Batch matching of small interior/functional parts

Small plastic parts in the automotive field, such as buckles, sensor housings, and interior buttons, need to be matched for mass production of the entire vehicle, and 36 cavity molds can meet delivery requirements.

Customization Process

Factory&About US

NingBo Plastic Metal Product Co.,Ltd (P&M) is located in Yuyao, the so-called Mould City, Plastic Kingdom, in the southern tip of Hangzhou Bay Bridge,north of Shanghai, the east of Ningbo Port,tight double line of State Road 329 on land, sea and air trafic into a network to facilitate transport.

By the abundant technical strength,scientific management methods and good after-sales service, product deeply trusted and welcomed by customers from all over the world. P&M holds improved system of development and production, to achieve mold design, plastic products manufacturing and automatic production. Our main products is design and manufacturing of plastic mold, plastic product, metal product. 90% products of our enterprise are exported to America, Europe, Germany, Japan, Australia, etc. For many years, the company has been committed to the research of raw materials. The company has its own trademark and dozens of patents, providing more convenient technical support for mold making and product production. P&M started domestic business from 2008,named Shundi Mould Factory. And opened the international market from 2014. We always adhere to the principles of quality first and time first. While providing customers with the highest quality products, try to maximize the production efficiency and shorten production time. We are proud to tell every customer that our company has not lost any customer since its establishment.If there is a problem with the product, we will seek a solution actively and take responsibility to the end.

P&M adheres to market-oriented to the quanlity of life and focus on quality service and continuous development of new products,determined to establish a better corporate image,and our friends at home and abroad to carry a wide range of business exchanges and cooperation, create brilliant.

Packing

Packaging according to your needs

1. By air ,it takes 3-7 days for delivery.

The goods can be shipped by DHL , Fedex , UPS .

2. By sea ,the delivery time is based on your port.

To South East Asian Countries takes about 5-12 days.

To Middle east countries takes about 18-25 days.

To European countries takes about 20-28 days.

To American countries takes about 28-35 days.

To Australia takes about 10-15 days.

To African countries takes about 30-35 days.

P&M Bike parts, centered around children, balances safety, health, and fun, aiming to add a bright color to children's beautiful childhood. We look forward to working together with you to serve our children.

The path of a child's growth is paved with bricks and tiles.

FAQ

1.Who are we?

We are based in Zhejiang, China, start from 2014,sell to North America(30.00%),Southern Europe(10.00%),Northern Europe(10.00%),Central America(10.00%),Western Europe(10.00%),Mid East(10.00%),Eastern Europe(10.00%),South America(10.00%). There are total about 51-100 people in our office.

2.How can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

3.What can you buy from us?

Mould, Plastic Product, Metal Product, Dental Product, CNC machining.

4.Why should you buy from us not from other suppliers?

We main do all kinds of 3d design, 3d printing and plastic metal molds tooling and products. We have our own engineer and factory. One-stop supply: 3d design - 3d printing - mold making - plastic injection.

5.What services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU;

Accepted Payment Currency: USD, EUR;

Accepted Payment Type: T/T,L/C,PayPal,Western Union,Escrow;

Language Spoken:English,Chinese,Spanish,French,Russian.

6.What are the characteristics of your service?

1. Your inquiry related to our products or prices will be replied within 24 hours.

2. Well-trained and experienced staffs to answer all your enquiries in fluent English.

3. Offering the support to solve the problem in the application or selling period.

4. Competitive prices based on same quality.

5. Guarantee samples quality same as mass production quality.