Injection Moulding Service Clear Storage Case

Injection molding service transparent storage box refers to a plastic container product that relies on injection molding technology services to heat and melt high transparency thermoplastic plastics (such as PP, PET, PC, transparent PA, etc.) or modified transparent plastics (such as toughened transparent PP, impact resistant transparent PC) through an injection molding machine, inject them into a customized mold cavity at high pressure and high speed, and form a transparent, visible, and storage function after cooling, solidification, and demolding.

Its core attributes are reflected in three dimensions: at the process level, it belongs to the typical application of injection molding services, relying on precise matching of mold design and process parameters to achieve mass production; At the material level, transparent plastic is used as the core carrier, and the transparency usually needs to reach 85% or more to ensure that the internal items are clearly visible; From a functional perspective, it integrates practical features such as storage space, sealing structures (such as buckles, sealing ring grooves), and stacking design, while balancing storage, protection, and space utilization needs.

Compared with traditional glass storage containers, injection molded transparent storage boxes have significant advantages: reducing weight by 60% -80% and eliminating the risk of breakage; Complex structures such as partition grids, drawer guides, and locks can be molded in one go through injection molding technology, without the need for secondary processing; Better impact resistance, suitable for daily frequent use scenarios; The production cost is only 30% -50% of the same specification glass products, and the transportation loss rate is less than 0.5%

P&M Injection Moulding Service Clear Storage Case Introduction

1. Scenario requirement analysis and product design

The starting point of production is to accurately match the functional and performance requirements of the storage scenario. The R&D team needs to clarify the core parameters: scenario parameters, performance requirements, and structural requirements.

Based on the requirements, use SolidWorks to draw a 3D model, simulate injection molding through Moldflow, optimize structural design: control wall thickness uniformity within ± 0.2mm; Add reinforcing ribs at the connection between the partition board and the box body; The depth of the sealing groove is 0.1-0.2mm greater than the diameter of the sealing ring (to ensure the sealing effect). Simultaneously conducting design for manufacturability (DFM).

2. Mold design and manufacturing: the core guarantee of transparency and accuracy

The mold is the key to determining the quality of transparent storage boxes, and it needs to be specially designed for transparency and structural accuracy.

3. Raw material selection and pretreatment: the basis of transparency and performance

Select suitable transparent plastic materials according to the storage scenario requirements and conduct strict pre-treatment.

4. Injection molding process parameter setting and mold testing

Trial molding is the key to verifying the compatibility between molds and processes, requiring precise parameter control to ensure transparency and structural accuracy.

5. Batch production and process control

After the trial mold is qualified, it enters mass production and ensures consistency through standardized control.

6. Product post-processing: optimizing appearance and functionality

Conduct targeted post-processing according to the application requirements of the storage box.

7. Finished product testing: full verification of compliance

The finished product needs to undergo multidimensional testing to ensure compliance with usage requirements and standards

Appearance and transparency testing, size and structural accuracy testing, fitting accuracy, mechanical and functional testing, impact resistance testing, buckle strength testing, sealing testing, safety and environmental protection testing, food contact safety, and environmental protection testing.

P&M Injection Moulding Service Clear Storage Case(Specification)

P&M Injection Moulding Service Clear Storage Case Feature And Application

1. Consumer home scene: visual organization and spatial optimization

Kitchen storage: Food grade transparent PP storage box is used to store grains, dry goods, and snacks, with a sealed design that is moisture-proof and insect proof. It is transparent and visible, making it easy to quickly find; PET transparent fresh-keeping box is suitable for refrigerator refrigeration, blocks odors, and can be microwave heated.

Beauty and skin care: PC transparent storage box is used to place lipstick, eye shadow, and makeup brush. It can be designed with a multi-layer drawer structure. The top layer is used to place regular supplies, and the bottom layer is used to store goods; The small storage box with partition is used for sorting out long and thin items such as eye black and eyeliner pen to avoid clutter.

Stationery Office: Transparent PS storage box is used to store small stationery such as paper clips, staples, and sticky notes. The desktop design with drawers saves space; Multi layer stacked storage box is used for classifying and storing documents and materials, with a transparent box body for easy identification of content.

Jewelry: PC+silicone sealed storage box is used to store necklaces, earrings, and rings. The compartment prevents jewelry from getting tangled, and the high transparency displays the luster of the jewelry, making it suitable for home storage and jewelry store display.

2. Electronic digital scene: protection and regulation of precision accessories

Small electronic accessories, digital product packaging, and maintenance tool storage

3. Industrial production scenario: Parts management and process adaptation

Workshop small parts storage, warehousing logistics turnover, medical consumables storage

4. Business service scenario: dual value of display and storage

Customization Process

Factory&About US

NingBo Plastic Metal Product Co.,Ltd (P&M) is located in Yuyao, the so-called Mould City, Plastic Kingdom, in the southern tip of Hangzhou Bay Bridge,north of Shanghai, the east of Ningbo Port,tight double line of State Road 329 on land, sea and air trafic into a network to facilitate transport.

By the abundant technical strength,scientific management methods and good after-sales service, product deeply trusted and welcomed by customers from all over the world. P&M holds improved system of development and production, to achieve mold design, plastic products manufacturing and automatic production. Our main products is design and manufacturing of plastic mold, plastic product, metal product. 90% products of our enterprise are exported to America, Europe, Germany, Japan, Australia, etc. For many years, the company has been committed to the research of raw materials. The company has its own trademark and dozens of patents, providing more convenient technical support for mold making and product production. P&M started domestic business from 2008,named Shundi Mould Factory. And opened the international market from 2014. We always adhere to the principles of quality first and time first. While providing customers with the highest quality products, try to maximize the production efficiency and shorten production time. We are proud to tell every customer that our company has not lost any customer since its establishment.If there is a problem with the product, we will seek a solution actively and take responsibility to the end.

P&M adheres to market-oriented to the quanlity of life and focus on quality service and continuous development of new products,determined to establish a better corporate image,and our friends at home and abroad to carry a wide range of business exchanges and cooperation, create brilliant.

Packing

Packaging according to your needs

1. By air ,it takes 3-7 days for delivery.

The goods can be shipped by DHL , Fedex , UPS .

2. By sea ,the delivery time is based on your port.

To South East Asian Countries takes about 5-12 days.

To Middle east countries takes about 18-25 days.

To European countries takes about 20-28 days.

To American countries takes about 28-35 days.

To Australia takes about 10-15 days.

To African countries takes about 30-35 days.

P&M Bike parts, centered around children, balances safety, health, and fun, aiming to add a bright color to children's beautiful childhood. We look forward to working together with you to serve our children.

The path of a child's growth is paved with bricks and tiles.

FAQ

1.Who are we?

We are based in Zhejiang, China, start from 2014,sell to North America(30.00%),Southern Europe(10.00%),Northern Europe(10.00%),Central America(10.00%),Western Europe(10.00%),Mid East(10.00%),Eastern Europe(10.00%),South America(10.00%). There are total about 51-100 people in our office.

2.How can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

3.What can you buy from us?

Mould, Plastic Product, Metal Product, Dental Product, CNC machining.

4.Why should you buy from us not from other suppliers?

We main do all kinds of 3d design, 3d printing and plastic metal molds tooling and products. We have our own engineer and factory. One-stop supply: 3d design - 3d printing - mold making - plastic injection.

5.What services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU;

Accepted Payment Currency: USD, EUR;

Accepted Payment Type: T/T,L/C,PayPal,Western Union,Escrow;

Language Spoken:English,Chinese,Spanish,French,Russian.

6.What are the characteristics of your service?

1. Your inquiry related to our products or prices will be replied within 24 hours.

2. Well-trained and experienced staffs to answer all your enquiries in fluent English.

3. Offering the support to solve the problem in the application or selling period.

4. Competitive prices based on same quality.

5. Guarantee samples quality same as mass production quality.